4. Quality Assurance Provisions:
4.1 Product Conformance. The products
provided shall meet the salient characteristics of this
commercial item description. The
quality of the product sold to the government shall be equal to
or better than the quality of the product sold by the
manufacturer in the commercial market. The
government reserves the right to
require proof of such conformance.
4.1.1 Performance. When used on the
designated machine model, ribbons shall produce clear, clean, and legible type
impressions. There shall be no evidence of filling. Type filling is the filling
of the typeface with fibers or ink from the ribbon, resulting in gradual
broadening or feathering of typed impressions are
examined. The ribbon shall pass the performance tests and required OEM
(original equipment manufacturers) specification in accordance with paragraph
4.1.2.
4.1.1.1 Typing Quality. The typed letters shall be
sharp and easily legible, without appreciable feathering, and the page shall be
clean, when tested in accordance with paragraph 4.1.2.
4.1.1.2 Type Filling. There shall be no evidence of
filling of type when tested in accordance with paragraph 4.1.2.
4.1.1.3 Uniformity of Inking & Density. Ribbons
shall be uniformly inked within and between rolls from the same contract, with
a density tolerance for initial lines of not more than 0.2 when tested in
accordance with paragraph 4.1.2
4.1.1.4. Weardown. On
black record ribbons the density of the 120th line shall not be less
than 30% of the density of the first line when tested in accordance with
section II. On black and red record ribbons the density of the 75th
line shall not be less than 30% of the first line when tested in accordance
with paragraph 4.1.2
4.1.1.5 Recovery. The density of the recovery line
shall not be less than that of line 110 for single-color ribbons and line 60
for two-color ribbons, when tested in accordance with paragraph 4.1.2.
4.1.1.6 Oiliness. There shall be no evidence of
staining when examined in accordance with paragraoph
4.1.2.
4.1.1.7 Permanent of Typing. The typing shall show no
marked fading when tested in accordance with paragraph 4.1.2.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business