A-A-370B
2.6 Length. Length shall be es specified as a
minimum. Ribbons shaIl be finished in continuous
lengths without joining or splicing.
2.7 Width. Ribbon width shall be as specified, A tolerance of
-t 0.4 mar – 0.0 mm
(+ 1/64 inch -0,0 inch) shall be permitted, provided print quality and
ribbon operation are not
affected.
2.8 Spools. Cartridges. & Cores. Each ribbon shall be
furnished on a metal or plastic spool,
cartridge, fiber core, fiber center or in a coreless cordiguration for the specified machine. Metal,
except aluminum, shall have so enamel, lacquer, or plated finish.
Each ribbon shall be designed to
operate satisfactofiy with the ribbon
feed and reversing mechanisms of the machine specified.
2.9 Workmanship. Ribbosrs”and their spools,
cartridges, or cores shall be free from defects that
will affect performance and serviceability, or present a hazard
to the user. Examples of ribbon
defects are uneven weave, frayed edges, slits, and knots.
2.10 Shelf Life. Ribbons shall have a shelf life of one year after delivery and shall
be capable of
withstanding normal usage and handling.
3. Regulatory Requirements: The offeror/contractor is
encouraged to use recovered materials
too the maximum extent practical, in accordance with paragraph
23.403 of the Federal
Acquisition
Regulation (FAR).
3.1 Hazardous Material Requirements.
3.1.1 Toxicity. Use of any toxic
substance must be irr accordance with all applicable
federal
statutes. The use of any known carcinogens as ingredients is prohibked. The harmfisl
substances
shall be defined as the poison and injurious substances as
designated in FederaJ Standard 313.
The vendor shall
prepare a certification that the ribbon conforms to the above requirements.
3.1.2 Material Safety Data Sheets. Data
sheets shall be
fimnished in accordance with Federal
Standard 313. The pertinent government mailing addresses for submission
of data are listed in
appendix B of Federal Standard 313.
3.1.3 Labelirs& Containers
shall be labeled to comply with the “Federal Hazardous Substances
Act Regulations”, 16 Code of Federal Regulations, Part 1500.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business