A-A-355B
I. Workmanship. The finished rulers shall exhibit no evidence of jagged or rough work. The ruler shall be free from any defects which may affect its durability, serviceability or appearance.
3. Quality Assurance.
A. Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the supplier is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified, the supplier may utilize his own facilities or any commercial laboratory acceptable to the Government. The Government reserves the right to perform any of the inspections set forth in the commercial item description, where such inspections are deemed necessary to assure that supplies and services conform to the prescribed requirements.
B. Each lot scales shall be inspected for conformance to the requirements herein. Sampling for inspection shall be in accordance with MIL-STD-105 using the plans specified below.
C. Visual characteristics- Inspection Level S-2 with an Acceptable Quality Level (AQL) of 4.0 percent defective. The sample unit shall be one scale.
D. Dimensional characteristics- Inspection Level S-2 with an Acceptable Quality Level (AQL) of 4.0 percent defective. The sample unit shall be one scale.
E. Packaging, Packing, and Marking- Inspection Level S-2 with an AQL of 4.0 percent defective. The sample unit shall be one fully prepared shipping container.
4. Preparation for delivery.
Packaging, packing and marking shall be as specified in the contract or purchase order.
5. Regulatory Requirements
The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business