A-A-2790
B. Sampling. Samples shall be selected for inspection in accordance with MIL-STD-105, using the plans described in Table 2. A lot shall consist of a number of sample units manufactured by the same process from the same components at the same time. Random samples shall be drawn from each lot for the end item inspection. Unless otherwise specified, every lot shall be tested.
TABLE 2
|
Inspection |
AQL (%) |
Inspection |
Sample |
Requirement |
|
Construction & Workmanship |
2.5 |
II |
one |
1A |
|
Dimensions |
2.5 |
II |
one |
1B |
|
Physical Characteristics |
2.5 |
S-1 |
one |
1C |
|
Packaging, Packing & Marking |
4.0 |
S-1 |
one shipping container |
4 |
C. Testing.
1). Thickness shall be tested in accordance with ASTM D 374. Method C.
2). Haze shall be tested in accordance with ASTM D 1003.
3). Flammability shall be tested in accordance with ANSI/ASTM D 568.
4). Tear resistance shall be tested in accordance with ASTM D 1004.
5). Seam Breaking Factor shall be tested in accordance with ASTM D 882, using
Test Method A, and Rate of Loading of 50 ± 13 mm/minute (2 ± 1/2
inches/minute). A convenient size sample shall be used with the seam located
midway between the clamps.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business