A-A-2657
2.7. The ribbons used shall be colorfast (see 3.3).
2.8. Outside decoration. A gold–colored border shall be heat stamped on the outside of the front cover. The border shall consist of 3 lines which follow the outer edges of the binder. The lines shall appear straight (except for the corners) and concentric with the outside of the cover.
Line 1 shall be 0.16 + 0.08 cm (1/16 +/- 1/32 inch) wide and located 0.32 + 0.08 (5/8 +1/32 inch) from the outer edge.
Line 2 shall be 0.16 + 0.08 cm (1/16 inch +/- 1/32 inch) wide and located )32 + 0.08 (1/8 + 1/32 inch) from the inside edge of Line 1.
Line 3 shall be 0.16 + 0.08 cm (1/16 inch wide +/- 1/32 inch) and located 0.95 + 0.08 cm (3/8 + 43 1/32 inch) from–the inside edge of line 2.
2.9. Workmanship. Completed binders shall present a neat, finished appearance both inside and outside. The binders shall be free from defects which may affect their durability, serviceability, or appearance.
3. Quality Assurance Provision
3.1. Product Conformance. The products provided shall meet the salient characteristics of this commercial item description, conform to the producer’s own drawingsl specifications, standards and quality assurance practices and be the same product offered for sale in the commercial market. The government reserves the right to require proof of such conformance.
3.2. Color shall be determined visually as a general match to the applicable color as determined in accordance with ASTM D 1729.
3.3. Colorfastness shall be tested for by using the following procedures. There shall be no transfer, bleeding or discoloration of colors, apparent to the naked eye after testing. The ribbon shall be tested as a part of an assembled binder.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business