A-A-2657
There shall be no cover board in the hinge area. The lining material shall extend over the inside of the back and front cover to a point that overlaps the turned edge of the outside covering. An outside hinge reinforcement strip of not less than 6.0 cm (2- 3/8 inch) wide and glued under the lining shall be included and shall be the same color as the covering material.
2.3. Materials. The covering material shall be light weight, levant grain, regular finish, imitation leather. The inside lining shall be either Granada tag cloth backed by a sheet of white bleached chemical wood bond paper, or number 2 felt finished text paper, such as wausau felt. The front and back covers shall be of 0.25 + 0.005 cm (0.100 inch + 0.002 inch) chipboard. The panels shall accommodate 30.8 X–25.7 cm (12-1/8 x 10-1/8 inch) award certificates.
2.4. Colors. The covering material shall be a dark blue near match to color chip 15044 of Federal Standard 595 (within a range of color chips 15042 to 15045) and the lining material shall be a white near match to color chip 37875 of Federal Standard 595 (within a range of color chips 37875 to 37886). Colors shall be tested in accordance with para. (3.2).
2.5. Corner ribbon retainers. The inside of the back cover shall have four diagonally mounted, 1.7 + 0.08 cm (11/16 + 1/32 inch) wide grosgrain white corner ribbon retainers. The opening side of the ribbon retainers shall be located not further than 1.9 cm (3/4 inch) from each of the four corners of the back lining sheet. The ends of these ribbon retainers shall be folded and glued under the back lining sheet.
2.6. Inside decoration. The inside of the front cover shall have a diagonally mounted, 2.2 + 0.16 cm (7/8 + 1/16 inch) wide; red, white and blue grosgrain ribbon. This ribbon shall be located in the upper right hand corner (with the red stripe nearer the right corner) . This ribbon shall be mounted such that, it is located 1.9 + 0.16 cm (3/4 + 1/16 inch) in the horizontal and vertical direction from the corner of the front lining sheet. The ends of this ribbon shall be folded and glued under the front lining sheet.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business