A-A-2642
2. QUALITY ASSURANCE PROVISION.
A. Responsibility for Inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract, the contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The inspections set forth in this commercial item description, where such inspections are deemed necessary to assure that supplies and services conform to prescribed requirements.
B. Sampling. Samples shall be selected for inspection in accordance with MIL-STD-105 using the plans described in Table II. A lot shall consist of a number of items manufactured by the same process from the same components at the same time. Random samples shall be drawn from each lot for the end item inspection. Unless otherwise specified, every lot shall be tested.
Table II
|
Inspection |
Inspection Level |
AQL |
Sample Unit |
Requirements Paragraph/s |
|
Design and Construction |
S-2 |
4.0 |
1 Binder |
1.A & 1.B |
|
Materials |
I |
4.0 |
* |
1.C |
|
Workmanship |
I |
4.0 |
1 Binder |
1.D |
|
Packaging, Packing & Marking |
S-4 |
4.0 |
1 Shipping Container |
4 |
* Certificates of compliance are acceptable for the component testing. If certificates of compliance are submitted, the Government reserves the right to check the validity of such certification.
3. REGULATORY REQUIREMENTS: the contractor is encouraged to use recovered materials in accordance with Public Law 94-580, as amended to the maximum extent practicable.
4. PACKAGING, PACKING, AND MARKING: Packaging, packing, and marking shall be as specified in the contract or purchase order.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business