[INCH-Pound]
A-A-117D
December 31, 1990
SUPERSEDING
A-A-117C
June 18, 1986
COMMERCIAL ITEM DESCRIPTION
PROTECTOR, DOCUMENT (BINDER FILLER)
This Commercial Item Description is approve by the Commissioner,
Federal Supply Services, General Services Administration, for the
use of all Federal Agencies.
This description covers document protectors which are intended for keeping documents neat and clean.
Classification- Each document protector shall be defined by the type and size as indicated below. The protector selected, shall be indicated by an item identifier number, as indicated on page 4.
Type A - Biaxially oriented polypropylene, polished
both sides, not less than 0.0020 inches thick.
Type B - Colorless plastic, matte both sides, not
less than 0.0035 inches thick.
Type C - Polypropylene, polished both sides, not
less than 0.0040 inches thick.
Size 1 - 11 inch length x 8 – 1/2 inch width
Size 2 - 11 inch length x 9 inch width
1. Salient characteristics.
A. The document protector shall consist of a flexible plastic sheet which is folded to form a double thickness of the size specified. A single sheet of black album paper, the same size as the protector, shall be inserted into the fold between the plastic.
B. The black album paper shall not be less than 25 percent chemical wood pulp and shall have a basis weight of 56 + 4 pounds (24 x 36 – 500 sheets). This weight basis shall be measured in accordance with TAPPI Standard T410.
C. The binding edge shall be along the length dimension and consist of the black album paper plus the triple thickness of the plastic sheet, all of which shall be punched with three holes.
DISTRIBUTION STATEMENT A: Approved for public release FSC 7510
Distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business