C. Testing.
(1). Performance test (Class A). Using bond paper with a basis weight of 75g/m2 (20-lbm, 17” x 22”-500), this test shall demonstrate the capability of the staples to consistently clinch 20 sheets. The stapling operation shall be done 100 times to form a standard clinch and 10 times to form a pin clinch. In order to be considered an acceptable specimen, at least 95% of operations shall comply with the requirements set forth in paragraph 2.C.(1) herein.
(2). Performance test (Class B). Spool of staple forming wire, shall be inserted in the stapler and shall form a standard clinch through 2, 6, and 16 sheets of 60g/m2 (16-lbm, 17”x22”-500) bond paper. For each of the three tests, 20 staples shall be used. In order to be considered an acceptable specimen, at least 95% of operations shall comply with paragraph 2.C.(2) herein.
(3). Performance test (Class C). Using bond paper with a basis weight of 60g/m2 (16-lbm, 17”x22”-500), this test shall demonstrate the capability of the staples to consistently clinch 20 sheets. The stapling operation shall be done 100 times to form a standard clinch. In order to be considered an acceptable specimen, at least 95% of operations shall comply with paragraph 2.C.(3). herein.
(4) Tensile strength test (Class A). Tensile strength shall be tested in accordance with ASTM E 8. Certificate of compliance is acceptable.
4. REGULATORY REQUIREMENTS: The offeror/contractor is encouraged to use recovered materials in accordance Paragraph 23.403 of the Federal Acquisition Regulation.
5. PACKAGING, PACKING AND MARKING: Packaging, packing and marking shall be as specified in the contract or order.
6. REFERENCED DOCUMENTS: The issue of the referenced documents in effect on the date of the solicitation for offers or request for proposals shall be used to determine conformance with requirements of this Commercial Item Description.
A. Federal Regulation:
Federal Acquisition Regulation. Paragraph 23.403
Copies of the U.S. Code may be obtained through the Congressional Sales Office, U.S. Government Printing Office, Washington D.C. 20402.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business