A-A-1019 Staples, Paper Fastening, Standard And Light Duty

Pages 1 - 2 - 3 - 4 - 5

A-A-1019C

(2). Class B. No evidence of staple fracture, malformation, or malfunction shall be observed, when tested as specified in (3.C.2).

(3) Class C. No evidence of staple fracture, malformation, or malfunction shall be observed, when tested as specified in (3.C.3).

D. Workmanship. Except for the staple points (leg ends), the staple strips shall be free of sharp edges. The staple strips shall also be free of any defects which impair serviceability, including, but not limited to, superfluous cement coating or burrs, or anything which might constitute a personal hazard to the user. The staples shall not exhibit evidence of deformity or cracking.

3. QUALITY ASSURANCE:

A. Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract, the contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in this Commercial Item Description, where such inspections are deemed necessary to assure that supplies and services conform to prescribed requirements.

B. Sampling. Samples shall be selected for inspection in accordance with MIL-STD-105, using the plans described in Table I. A lot shall consist of a number of sample units manufactured by the same process from the same components at the same time. Random samples shall be drawn from each lot for end item inspection. Unless otherwise specified, every lot shall be tested.

TABLE I