A-A-2959
2.2 Material. The signal tabs shall be designed and constructed from a spring steel of a quality which will conform with the requirements of this commercial item description.
2.3 Dimensions. The signal tab dimensions shall be as follows:
Overall length of tab - 2.06 ± 0.08cm (13/16 ± 1/32 inch.)
Length of projection (flag and neck) - 0.79 ± 0.08Cm
(5/16 ± 1/32 inch.)
Width of holding device - 0.87 ± 0.08cm (11/32 ± 1/32 inch.)
Width of flag (minimum) - 0.56cm (7/32 inch).
2.4 Colors. Blue, Black, Lt Red, Lemon yellow.
As specified in the contract or order (see 5-1).
2.5 Finish. The flag, or the entire tab shall be covered with a glossy coating of the color specified. My uncoated part of the tab shall have a corrosion-resistant finish.
2.6 Workmanship. The signal tabs shall-be free from cracks, malformation, burrs, sharp or rough edges, or other defects, and shall be clean and free from foreign matter which may affect appearance or serviceability.
3. QUALITY ASSURANCE PROVISIONS.
3.1 Contractor Certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this Commercial Item Description, and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices. The government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
Suppliers are encouraged to use quality control (QC) techniques that exhibit control over their processes (e.g. (Statistical Process Control) SPC techniques) as defined in American National Standards Institute (ANSI) Z1.1, Z1.2 and Z1.3/ American Society for Quality Control (ASQC) B.1, B.2 and B.3 that systematically reduce excess variations. Objective evidence shall be available that demonstrates overall measurement adequacy techniques and controls. These techniques shall ensure quality levels equal to, or greater than, those cited in applicable technical document or, herein.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business