A-A-2792A
3. QUALITY ASSURANCE:
A. Responsibility for Inspection. Unless otherwise specified in contract, the contractor is responsible for the performance of inspection requirements as specified herein. Except as otherwise specified in the contract, the contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure that supplies and services conform to prescribed requirements.
B. Contractor Certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this Commercial Item Description, and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices.
C. Sampling. Samples shall be selected for inspection in accordance with MIL-STD-105, using the plans described in Table II. A lot shall consist of all items of the same type, as applicable, offered for delivery at one time. Random samples shall be drawn from each lot for the end item inspection.
TABLE II
|
Inspection Type |
AQL (%) defective |
Inspection Level |
Sample Unit |
Requirement Paragraph |
|
Construction & Workmanship |
4.0 |
S-2 |
one clip |
2.A |
|
Physical Characteristics |
2.5 |
S-1 |
one clip |
2.B |
D. Testing.
1). Dispensing Test. A minimum of 20 clips for Type I dispenser and 16
clips for Type II dispenser shall be propelled through the dispenser.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business