A-A-2791A
2. SALIENT CHARACTERISTICS:
A. Construction.
Type I - Type I dispensers shall be as illustrated in Fig.1 on page 3. Dispensers shall be composed of the main body and the base with overall length of 17.8 + 1.3 cm (7” + 0.5”). The main body shall contain a receptacle slot for containing the clips; an operating push down handle pivoting on the metal rod; a clip pushing rod and the assembly of linkages to operate it; a return spring; a metal mechanism for spreading the clip before clipping pages of paper. The receptacle slot shall be inclined at the proper angle to allow clips to slide down easily. Dispenser’s base shall be fitted with two non-skid rubber pads. Dispensers shall have a feed slot at the upper rear of the main body to allow for clips refill. Dispensers shall accommodate 10 Size 2 clips in accordance with CID A-A-2792A. Dispensers shall be marked with the name or trademark of the manufacturer.
Type II- Type II dispensers shall be as illustrated in Fig. 2 on page 3. Size I dispensers shall have an overall length of 9.5 + 1.3 cm (3.75° + 0.5”) and shall accommodate 8 Size 1 clips in accordance with CID A-A-2792A. Size 2 dispensers shall have an overall length of 11.4 & 1.3 cm (4.5” + 0.5”) and shall accommodate 8 Size 2 clips in accordance with CID A -A-2792A. Size 3 dispensers shall have an overall length of 14.0 + 1.3 cm (5.5” + 0.5”) and shall accommodate 8 Size 3 clips in accordance with CID A-A-2792A. Dispensers shall be composed of an upper and lower body, a metal retainer clamp, a clip pushing rod with a push and slide button attached, a return spring, and a metal mechanism for spreading the clip before clipping pages of paper. Dispensers shall have a feed slot at the rear of the body to allow for clips refill. Dispensers shall be marked with the name or trademark of the manufacturer.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business