A-A-208 Ink, Marking, Stencil, Opaque (Porous And Non-Porous Surfaces)This commercial item description covers four types of opaque ink for marking on porous and non-porous surfaces.

Pages 1 - 2 - 3 - 4 - 5 - 6

A-A-208C

6.            Packaging:

6.1          Preservation, packing, and marking shall be as specified in the contract or order.

7.            Notes.

7.1          Part Identification Number (PIN).             The following part identification numbering procedure is for government purposes and does not constitute a requirement for the contractor.

This example describes a part numbering system for CID A-A-208B:

A-A-208B             4

|              Type:     1-Type I-Non-Porous Surfaces

|              (non-pressurized containers)

|              2-Type II-Porous Surfaces (non-pressurized containers)

|              3-Type III-Porous or Non-Porous Surfaces

|              (pressurized containers)

|              4-Type IV-Porous or Non-Porous Surfaces (stencil rollers)

7.2          Applicable Documents. Issues of the following documents, in effect on the date of invitation for bids or request for proposal form a part of this document to the extent specified herein.

7.2.1      Copies of ASTM methods may be obtained at 1916 Race Street, Philadelphia, PA 19103.

7.2.2      Federal Acquisition Regulation (FAR) may be obtained from the Superintendent of Documents, Government Printing Office, Washington, DC 20402.

7.2.3      Federal Standards and Specifications may be obtained from the General Services Administration Specifications Section (3FBO-W) in Suite 8100 at 490 L’Enfant Plaza, SW Washington, DC 20407.

7.2.4      ANSI/ASQC Z1.4 may be obtained from the American Society for Quality control, PO Box 3005, 611 E. Wisconsin Avenue, Milwaukee, Wisconsin 53201-4606.

7.3          Ordering Information.   Purchaser should select the required options permitted herein, and include the following information in procurement documents.

A.            Title, number and date of this commercial item description

B.            Purchasers shall specify the type and color of ink require

C.            Purchasers shall specify size of container.

D.            Purchasers shall specify arrangement for inspection and inspection facilities, if other than            specified (see tests and quality assurance requirements).

E.            Purchasers shall specify packaging, packing and special marking.

F.            Purchasers shall specify if bar code marking is not required.

G.           Purchasers may specify alternative applicator style, if required.