A-A-208C
3.4.1 Propellant: The propellant shall be environmentally safe.
3.4.2 Dispensing Valve: The valve shall have a spray head which can removed without releasing pressure from aerosol can. The spray head shall contain an orifice of such dimensions as to produce desirable spraying properties.
3.4.3 Agitator: Each dispenser of the pigmented material shall contain one or more agitators in accordance with the manufacturer’s commercial standard practice.
3.4.4 Cover Cap: A full cover cap is required and shall visually match the color of the ink.
3.5 Shelf Life: The ink shall be able to meet all the requirements of this specification from the time of delivery to a minimum of 24 months in storage.
3.6 Workmanship. The stencil inks shall be in a homogeneous state, free from foreign matter and shall conform to the levels of quality established herein. The containers (cans, ottles, tubes) shall be in accordance with the manufacturers commercial practice and shall have no defects that affect serviceability or appearance.
4. Regulatory Requirements:
The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
4.1 Toxicity: The use of benzene or carbon tetrachloride solvents and any known carcinogens as ingredients is prohibited. Trace amounts of benzene derivatives present in commercial grades of acceptable aromatics are permissible. Inks shall contain no chlorinated compounds or other toxic hydrolysable chlorine derivatives. The use of any toxic substance must be in accordance with all applicable federal statutes.
4.2 Labeling. Stamp pad ink containers shall be labeled to comply with the “Federal Hazardous Substances Regulation”, 16 Code of Federal Regulations Part 1500.
4.3 Material Safety Data sheets: Safety data sheets shall be furnished in accordance with Fed-Std-313. The pertinent government mailing addresses for submission of data are listed in appendix B of Fed-Std-313.
5. Quality Assurance Requirements:
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business