A-A-52124
NOTE:
1/ Peel strength is measured using Pressure Sensitive Tape Council (PSTC) No. 1. Test Method: Peel Adhesion for Single Coated Pressure Sensitive Tape 180° Angle.
2/ Peel Bond is measured using commercial industries Polyten Tack Test Method.
1.2.3 Barrier tape coating. The barrier tape coating in between the adhesive and the tricot knit substrate shall be thermoset polyurethane and with a thickness of 2 ± 0.25 mil.
1.2.4 Cloth, for adhesive tape. The cloth for adhesive tape shall be made of nylon, tricot knit and weigh 1.5 ± 0.3 oz. per square yard.
1.2.5 Dimensions. The finished dimensions of the repair tape shall be 3 ± 1/16 by 15 ± 1/4 inches.
1.2.6 Color. The color of the tape shall be Olive Green 106.
1.2.7 Paper release liner. The paper release liner shall be differential silicone coated release liner.
1.3 Instructions sheet for use. The instructions sheet for use shall be unfolded and placed inside the sealed kit with the wording facing out on the opposite side of the item description label (see 1.3.1) and shall be as follows:
ECWCS Parka and Trousers
Repair Kit
INSTRUCTIONS FOR USE
* Best adhesion results are
achieved with a clean, dry
surface.
* Cut a desired length of
tape with a pocket knife.
Dimensions should be 1
inch longer and wider than
the rip/tear. Use the full
width (3 inches) of the
tape whenever possible.
* Remove paper backing with
knife blade along tape
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business