A-A-407C
2. Quality Assurance
Each lot of fasteners shall be inspected for conformance to the requirements herein. Sampling for inspection shall be in accordance with MIL-STD-105 using the plans specified below.
Visual, dimensional and performance characteristics- Inspection Level S-2 with an Acceptable Quality Level (AQL) of 4.0 percent defective. The sample unit shall be one fastener.
Packaging, packing, and marking- Inspection Level S-2 with an AQL of 4.0 percent defective. The sample unit shall be one fully prepared shipping container.
3. Preparation for Delivery.
Packaging, packing, and marking shall be specified in the contract or purchase order.
4. Application for copies of technical documents referenced herein: The issue date effect on the date of invitation for bids or request for proposal shall be apply.
MIL-STD-105 is available from Naval Publications and Forms Center; 5801 Tabor Avenue, Philadelphia, PA 19120.
5. Recovered Materials
The manufacturer shall utilize recovered materials to the maximum extent practicable.
6. Ordering Data.
Purchasers should specify the center to center spacing and capacity desired.
7. Notes.
Instructions for assembly shall be provided with each unit container (box) of three piece fasteners.
|
No Official: DOD Interest Has Been Registered |
|
Preparing Activity: GSA/FSS |
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business