A-A-2763 Typing, Element (Disk Type)

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7

A-A-2763

The examination for the characteristics listed in the following table will be based on the specifications/requirements obtained from the OEM for the specific typing elements being examined.

Examine	Defects
OEM specifications	Not as specified

E. Sampling of end items for performance tests. The sample unit shall be one typing element. The sample from each lot in accordance with Inspection Level S-1. The AQL shall be 2.5 percent defective.

1. Performance Testing. The typing element shall be performance tested in accordance with paragraph II for each lot delivered. If the reject number is reached for the sample size, the lot shall be rejected.

F. Packaging, Packing, and Marking. Inspection Level S-2 with an AQL of 4.0 percent defective. The sample unit shall be one fully prepared shipping container inspected for conformance with the requirements of section VI.

VI. Preparation for delivery.

A. Packaging, and packing. Packaging, and packing shall be indicated below, unless specified otherwise in the contract or purchase order (see VIII).The normal commercial number of unit packages shall be packed in a close-fitting fiberboard box used commercially for this item and provide product protection against loss and damage during multiple shipments, handling, and storage. The complete pack shall be in compliance with the Uniform Freight Classification and the National Motor Freight Classification. The weight of the shipping container shall not exceed 65 pounds.

B. Marking. Marking shall be as indicate below, unless specified otherwise in the contract or purchase order (see VIII).

1. For Shipment To Civil agencies. In addition any special marking required by the contract or order, interior packages and exterior shipping containers shall be marked in accordance with Fed. Std. No. 123 Bar code marking is required, unless specified otherwise (See VIII).

2. For Shipment To Military activities. In addition to any special marking required by the contract or order, interior packages and exterior shipping containers shall be marked in accordance with MIL-STD.129. Bar code marking is required, unless specified otherwise (See VIII).