A-A-2666A
The hardness of the lead shall be such that no inversion shall take place as the density transits from 6H to 4B for the leads of the same brand. The grades and lack of inversions shall be certified by the vendor to be in conformance with normal commercial practice. The evidence of this conformance shall be available to the government in the form of a chart of line densities for the full range of grades, upon request.
2.6 Length. Measurements shall be made once per each specimen selected, using a device with a precision of at least 0.1 mm.
2.7 Workmanship. Pencils shall be free from defects which affect the serviceability or appearance.
3. Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
4. Quality Assurance Requirements:
4.1 Product Conformance. The products provided shall meet the salient characteristics of this commercial item description. Conform to the producer’s own drawings, specifications, standards and quality assurance practices and be the same product offered for sale in the commercial market. The government reserves the right to require proof of such conformance.
4.2 Examination and Testing.
4.2.1 Suppliers are encouraged to use quality control (QC) techniques that exhibit control over (ASQC) B1, B2 and B3 that systematically reduce excess variations. If used, objective evidence shall be available that demonstrates overall measurement adequacy techniques and controls. These techniques shall ensure quality levels equal to, or greater than, those cited in applicable technical document or, herein.
4.2.2 End item inspection/testing may be used by the offeror or the Government representative, as a means to determine the effectiveness of the in process quality controls. While in process controls shall not be substituted for end item performance testing they may be used in lieu of visual and dimensional inspections.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business