A-A-1828B
5.2 Examination and Testing.
5.2.1 Suppliers are encouraged to use quality control (QC) techniques that exhibit control over their processes (e.g. (Statistical Process Control) SPC techniques) as defined in American National Standards Institute (ANSI) Z1. 1, Z1.2 and Z1 .3/ American Society for Quality Control (ASQC) B.1, B.2 and B.3 that systematically reduce excess variations. If used, objective evidence shall be available that demonstrates overall measurement adequacy techniques and controls. These techniques shall ensure quality levels equal to, or greater r.haq those cited in applicable technical document or, herein
5.2.2 End item inspection /testing may be used by the offeror or the Government representative, as a means to determine the effectiveness of the in process quality controls. While in-process controls shall not be substituted for end item performance testing they may be used for visual and dimensional sampling.
5.2.3 For those characteristics for which there are no such controls, or for end item performance test, lot by lot sampling for inspection/test shall be required. The sample unit shall be one tube or box of leads of either type. Sampling shall be in accordance with the American National Standards Institute (ANSI)/ American Society for Quality Control (ASQC) ZI .4, Sampling Procedures and Tables for Inspection by Attributes.
5.2.4 An inspection lot shall consist of all like items submitted for inspection at one time. The inspection level for visual dimensional defects, and measurement testing shall be S-1 with an AQL of 4.0 percent defective. The supplier must provide objective evidence (tests and inspection records) that the presented material meets the requirements of the sampling plan as indicated above.
6. Packaging:
6.1 Preservation packing and marking shall be specified in the contract or order.
7. Notes:
7.2 Applicable Documents. Issues of the following document in effect on the date of invitation for bids or request for proposal form a part of this document to the extent specified herein.
7.2.1 Federal Acquisition Regulation (FAR) may be obtained from the Superintendent of Documents, Government printing Office, Washington. DC 20402
7.2.2 Application for copies of (ANSI) Z1. 1, Z1.2, Z1.3 and (ASQC) B. 1, B.2 and B.3 may be obtained from the American Society for Quality Control. PO Box 3005, 611 E.Wisconsin Avenue, Milwaukee, WI 53201-4606.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business