[INCH-POUND]
A-A-2707
November 30, 1990
COMMERCIAL ITEM DESCRIPTION
STAPLES, HEAVY DUTY, PAPER FASTENING
The General Services Administration has authorized the use of this Commercial
Item Description (CID) in lieu of Federal Specification GG-S-745 (Staples,
Class A, Size 2).
This description covers preformed, heavy duty staples which are used for clinching paper.
Classification: The staples covered by this Commercial Item Description shall have the following leg lengths, as specified. The leg length tolerance shall be plus (+) 0.0156, minus (-) 0. (See Section 6, Ordering Data):
Leg Length
Size A - 0.2500 Inch (1/4”)
Size B - 0.3750 Inch (3/8”)
Size C - 0.5000 Inch (1/2”)
1. SALIENT CHARACTERISTICS:
A. Staples shall have 0.5000 to 0.5070 inch crowns.
B. The top face of the staple shall be 0.029 + 0.002 inches wide.
C. The wire thickness shall be 0.0215 + 0.0025.
D. Each staple leg shall be perpendicular to the staple crown to within on
degree.
E. Staples shall be cemented together to form a strip. Unless otherwise
specified, strips shall contain no less than 98 and no more than 140 staples,
and shall be supplied 5,000 (+ Unlimited, - O) to a box.
Distribution Statement A:
Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business