[METRIC]
A-A-1688A
NOVEMBER 30, 1995
SUPERSEDING
A-A-1688
JULY 23, 1981
COMMERCIAL ITEM DESCRIPTION
TAPE, PRESSURE-SENSITIVE ADHESIVE (PAPER PHOTOGRAPHIC)
1. SCOPE
This Commercial Item Description covers photographic, pressure-sensitive adhesive tape.
2. SALIENT CHARACTERISTICS
2.1 The tape shall be flat black (matte, no gloss) crepe paper for use in edging and blocking out purposes in the development and printing of photographic negatives. It may also be used for sealing cans of film.
2.2 The tape shall comply with the test requirements stated in section 4.3 when tested with the appropriate test methods.
Workmanship. The tape shall be uniformly constructed and free from defects which may impair usefulness of the material for the intended use. The adhesive shall be coated in a smooth uniform layer over the entire surface of one side of the tape backing. The tape shall be evenly and tightly wound with no voids. The edges shall be clean cut. When unwound, the tape shall not tear nor shall the adhesive separate from the backing.
3. REGULATORY REQUIREMENTS
The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).
|
Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data which may improve this document should be sent to: General Services Administration, Federal Supply Service, 26 Federal Plaza, New York, NY 10278 ATTN.: Engineering Branch (2FYEE). |
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business